The Bituver M-25 waterproofing membranes are made with a special metallocene resin based APAO elastoplastomeric compound.
Cold flexibility: -25°C
The reinforcement is made up of an extremely high-weight polyester unwoven fabric with continuous strand reinforced in fibreglass.
The 4 mm versions (both mineral and smooth) are certified for single-layer use.
Bituver_tech

Key benefits

The Bituver M-25 membranes can be used on any type of covering.

Miscellaneous

Application

  • Use the PPE required by the law
  • Adequately clean the support
  • We always recommend preparing the support with bituminous primer Bituver ECOPRIVER
  • The product is suitable for torch application by heating the lower coated surface of a special heat melt film with a propane gas torch
  • Always apply between +5°C and +35°C.

Storage

Store the rolls indoors, protected from sunlight and at a temperature no lower than +5°C. Keep the rolls in a vertical position. If possible, avoid stacking the pallets. We recommend using the product within 2-3 months from delivery.