Bituver Monoplus
Cold flexibility: -20°C
The reinforcement is made up of an extremely high-weight polyester unwoven fabric with continuous strandreinforced in fibreglass. The 4 mm versions (both mineral and smooth) are certified for single-layeruse
The membranes are also available in the Californiaversion with white reflective slate* SRI medium wind 55 -Solar Reflectance 0.48
*EELab Dept. of Mechanical and Civil Engineering test report
The reinforcement is made up of an extremely high-weight polyester unwoven fabric with continuous strandreinforced in fibreglass. The 4 mm versions (both mineral and smooth) are certified for single-layeruse
The membranes are also available in the Californiaversion with white reflective slate* SRI medium wind 55 -Solar Reflectance 0.48
*EELab Dept. of Mechanical and Civil Engineering test report
Key benefits
The MONOPLUS membranes can be used on any type of covering.
Miscellaneous
Application
- Use the PPE required by the law
- Adequately clean the support
- We always recommend preparing the support with bituminous primer Bituver ECOPRIVER
- MONOPLUS is suitable for torch application by heating the lower coated surface of a special heat melt film with a propane gas torch.
- Always apply between +5°C and + 35°C
Storage
Store the rolls indoors, protected from sunlight and at a temperature no lower than +5°C. Keep the rolls in a vertical position. If possible, avoid stacking the pallets. We recommend using the product within 2-3 months from delivery.
Membrane resistenti alla grandine
