BITUVER X-10 membranes are realized with elastoplastomeric (BPP) compound that reaches –10°C cold flexibility made by a low filler content.


BITUVER X-10 membranes are realized with elastoplastomeric (BPP) compound that reaches –10°C cold flexibility made by a low filler content. The products are reinforced by polyester stabilized with glass filaments or by glass mat.

BITUVER X-10 is also available in the “TEX” version with “DECOTEX” treatment, consisting in the application on the upper face of a special black polypropylene tissue.
BITUVER X-10 MINERAL is available with natural or colored slates.

Bituver_X_10

Advantages

  • Wide range of use
  • Double layer waterproofing for any type of structure
  • Excellent mechanical resistance
  • Constant flexibility over time
  • Ideal even under heavy layer

Variants Details

TECHNICAL DATA Standard Reference Bituver X-10 Toll.
Cold flexibility UNI EN 1109 – 10°C
Flow resistance EN 1110 120°C
Flow resistance
after ageing
UNI EN 1296
UNI EN 1110
110°C – 10°C
Tensile strength
at breaking L/T
UNI EN 12311-1 500/400 N
/50 mm
– 20%
Vapour permeability UNI EN 1931 μ 20.000


 
DIMENSIONS Reinforcement Thickness
weight/m²
m²/pallet
BITUVER X-10
4 mm P
Polyester 4 mm 230
BITUVER X-10
TEX 4 mm P
Polyester 4 mm 230
BITUVER X-10
Mineral 4 kg P
Polyester 4 kg 250
BITUVER X-10
Mineral 4,5 kg P
Polyester 4,5 kg 230
It is advisable to keep the rolls in warehouse, not exposed to the sun rays and at a higher temperature than +5°C. Keep the rolls in the upright position. If possible, avoid stacking pallets, especially with slated membranes. It is advisable to use the product within 2/3 months from delivery.
 
MAIN USES BITUVER X-10 BITUVER X-10 MINERAL
Base layer X  
Middle layer X  
Top layer X (4 mm)* X
Under heavy layer X (4 mm)  
Fondation X  
Earth retention X  
Under tiles   X
4mm with protective paint

Miscellaneous

APPLICATION:

  • Use Personal Protective Equipment as requested by law;
  • Clean properly the surface on which membranes has to be applied;
  • The treatment of the application surface with Bituver ECOPRIVER water based bituminous primer is suggested;
  • BITUVER X-10 is meant to be applied by flame with a gas propane blow torch by heating the lower face, covered with a special thermofusibile film;
  • Apply between +5° C and + 35° C.