BITUVER X-5 membranes are realized with elastoplastomeric (BPP) compound that reaches –5°C cold flexibility made by a low filler content.

BITUVER X-5 membranes are realized with elastoplastomeric (BPP) compound that reaches –5°C cold flexibility made by a low filler content. The products are reinforced by polyester stabilized with glass filaments or by glass mat.

BITUVER X-5 is also available in the “TEX” version with “DECOTEX” treatment, consisting in the application on the upper face of a special black polypropylene tissue.
BITUVER X-5 MINERAL is available with natural or colored slates.

Advantages

  • Excellent adhesion
  • Quality comparable to higher range membranes
  • Excellent value for money
  • Good mechanical strength
  • Ideal even under heavy protection

Variants Details

TECHNICAL DATA STANDARD REFERENCE Bituver X-5 Toll.
Cold flexibility UNI EN 1109 – 5°C
Flow resistance EN 1110 120°C
Flow resistance
after ageing
UNI EN 1296
UNI EN 1110
110°C – 10°C
Tensile strenght
at breaking L/T
UNI EN 12311-1 400/300 N
/50 mm
– 20%
Vapour permebility UNI EN 1931 μ 20.000
 
DIMENSIONS REINFORCEMENT THICKNESS
WEIGHT/M2
M²/PALLET
BITUVER X-5
3 kg V
Glass mat 3 kg 300
BITUVER X-5
4 kg V
Glass mat 4 kg 250
BITUVER X-5
3 mm P
Polyester 3 mm 250
BITUVER X-5
4 mm P
Polyester 4 mm 230
BITUVER X-5
TEX 4 mm P
Polyester 4 mm 230
BITUVER X-5
MINERAL 4 kg P
Polyester 4 kg 250
BITUVER X-5
MINERAL 4,5 kg P
Polyester 4,5 kg 230
It is advisable to keep the rolls in warehouse, not exposed to the sun rays and at a higher temperature than +5°C. Keep the rolls in the upright position. If possible, avoid stacking pallets, especially with slated membranes. It is advisable to use the product within 2/3 months from delivery.
 
Suggested uses Bituver X-5 V Bituver X-5 P Bituver X-5 Mineral P
Base layer X X  
Middle layer X X  
Top layer   X (4 mm)* X
Under heavy layer   X (4 mm)  
Fondation X X  
Earth retention X X  
Under tiles     X
4mm with protective paint

Miscellaneous

APPLICATION

  • Use Personal Protective Equipment as requested by law;
  • Clean properly the surface on which membranes has to be applied;
  • The treatment of the application surface with Bituver ECOPRIVER water based bituminous primer is suggested;
  • BITUVER X-5 is meant to be applied by flame with a gas propane blow torch by heating the lower face, covered with a special termofusibile film;
  • Apply between +5° C and + 35° C