Bituver XB-10
BITUVER XB-10 membranes are realized with plastomeric (BPP) compound that reaches –10°C cold flexibility.
The product has a good mechanical resistance and high dimensional stability.
BITUVER XB-10 is also available in the “TEX” version with “DECOTEX” treatment, consisting in the application on the upper face of a special black polypropylene tissue.
Bituver XB-10 MINERAL è is available with natural or colored slates.
The product has a good mechanical resistance and high dimensional stability.
BITUVER XB-10 is also available in the “TEX” version with “DECOTEX” treatment, consisting in the application on the upper face of a special black polypropylene tissue.
Bituver XB-10 MINERAL è is available with natural or colored slates.
Advantages
- Wide range of versions
- Easy installation
Variants Details
| Technical Data | Standard Reference | Bituver XB-10 | Toll. |
|---|---|---|---|
| Cold flexibility | UNI EN 1109 | – 10°C | ≤ |
| Flow resistance | EN 1110 | 120°C | ≥ |
| Flow resistance after ageing |
UNI EN 1296 UNI EN 1110 |
110°C | – 10°C |
| Tensile strength at breaking L/T |
UNI EN 12311-1 | 400/250 N /50 mm |
– 20% |
| Vapour permeability | UNI EN 1931 | μ 20.000 | – |
| Dimensions | Reinforcement | Thickness weight/m2 |
m²/pallet |
|---|---|---|---|
| Bituver XB-10 4 mm P |
Polyester | 4 mm | 230 |
| Bituver XB-10 TEX 4 mm P |
Polyester | 4 mm | 230 |
| Bituver XB-10 Mineral 4 kg P |
Polyester | 4 kg | 250 |
| Bituver XB-10 Mineral 4,5 kg P |
Polyester | 4,5 kg | 230 |
| Main Uses | Bituver XB-10 P | Bituver X-10 MINERAL P |
|---|---|---|
| Base layer | X | |
| Middle layer | X | |
| Top layer | X (4 mm)* | X |
| Foundation | X | |
| Earth retention | X | |
| Under tiles | X |
Miscellaneous
APPLICATION
- Use Personal Protective Equipment as requested by law;
- Clean properly the surface on which membranes has to be applied;
- The treatment of the application surface with Bituver ECOPRIVER water based bituminous primer is suggested;
- BITUVER XB-10 is meant to be applied by flame with a gas propane blow torch by heating the lower face, covered with a special termofusibile film;
- Apply between +5° C and + 35° C.
